Using the remote commander, Specifications, Utilisation de la télécommande – Sony VCT-670RM User Manual

Page 5: Spécifications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

English

Français

1

Using the Remote

Commander

Refer to the operation manual
of the video camera recorder
for further information.
Connect the remote plug
securely to the Remote C
control jack of the video
camera recorder. (S)

If the remote plug is not

connected securely, you may

not be able to operate the
video camera recorder.
Set the power switch of the

video camera recorder to

"CAMERA" and then to
recording standby mode.

S

Recording

1 Slide the recording

standby switch of the pan
handle to STANDBY.
Slide the recording

standby switch firmly
until it clicks.

2

Press the START/STOP
button to start recording.

To stop recording, press
START/STOP.
To resume recording, press it

again.

m Zooming

Press the zoom button
towards T side for telephoto
(subject appears closer), and
W side for wide-angle
(subject appears farther
away). Depending on the

type of your video camera
recorder; if you press the
zoom button still more, the

zooming will be faster.

n To Finish Recording

Slide the recording standby
switch to LOCK. The power
of the video camera recorder

is turned off.

n Changing the Angle of

the Remote
Commander

1 Lift up the Remote

Commander of the pan
handle. The Remote
Commander turns right
and left.

2

Adjust the angle.

3 Let the Remote

Commander go as before.

Q Recording with photo

mode function

Press PHOTO MODE.
• Some video cameras are

not compatible with photo
mixio.

• You cannot check the

picture during watching
the still picture (Photo
Memory) by pressing

PHOTO MODE twice.

Q When you do not use

the Remote
Commander

Insert the remote plug into
the pan handle securely to
prevent the remote plug from

being broken.

GQ Changing the Angle of

the Tripod head

Loosen the tripod head lock
knob and tilt the tripod head
to the desired angle.

Specifications

Maximum load

3 kg (4 lb 6 oz)

Panning angle

360 degrees

Tilting angle

90 degrees down, 65
degrees up

Stages of legs

4 stages

Remote control

Function: Recording
start/stop, standby/lock.
Zooming, Photo mode

, on/qff

Cord length: 320 mm

{

12

%

inches)
Pan handle length; 270

mm (10% inches)

Dimensions

Maximum height;
Approx. 1,450 mm

(57'/sinches) (Legs spread
and elevator used)
Minimum height: Approx.
480 mm (19 inches)

Elevator stroke: Approx.
240 mm (9% inches)

Mass

Approx. 1300g (2 lb 14 oz)

Supplied accessory

Operating instructions (1)
Carrying bag (1)

Design and specifications are
subject to change without
notice.

This mark indicates that this
product is a genuine
accessory for Sony video
products.

When purchasing Sony video
prrxlucts, Sony recommends
that you purchase accessories
with this "GENUINE VIDEO

ACCESSORIES" mark.

Utilisation de la

télécommande

Référez-vous au mode
d'emploi du caméscope pour
plus d'informations.
Raccordez la fiche de
télécommande à la prise de
télécommande

C

du

caméscope. (S)
Si la fiche de télécommande

n'est pas correctement
positionnée, vous risquez de
ne pas pouvoir utiliser le
caméscope.Mettez

l'interrupteur du caméscope
en position "CAMERA" puis
en mode de pause
d'enregistrement.

@ Enregistrement

1 Faites glisser le

commutateur de pause
d'enregistrement de la
poignée de panoramique

sur STANDBY.
Faites glisser le

commutateur de pause
d'enregistrement
fermement jusqu' à ce
qu'il s'encliquette.

2

Appuyez sur

la touche

START/STOP pour
entamer Terrregistrement.

Pour arrêter l'enregistrement,
appuyez sur la touche
START/STOP.
Appuyez sur ce même

bouton pour reprendre

l'enregistrement.

Q Zoom

Poussez le commutateur de
zoom vers le T (téléobjectif)
pour rapprocher le sujet et
vers le W (grand angle) pour
éloigner le sujet. En fonction

du type de caméscope; si
vous appuyez sur la touche
de zoom un peu plus, le,
zoom se fera plus
rapidement.

D

Pour terminer

l'enregistrement

Faites glisser le commutateur
de pause d'enregistrement
sur LOCK. Le caméscope est
mis hors tension.

D

Changement de

l'angle de la

télécommande

1 Soulevez la

télécommande de la
poignée de panoramique.
La télécommande tourne
vers la droite et vers la

2 Réglez l'angle.
3
Laissez la télécommande

fonctionner comme avant.

Q Enregistrement avec

la fonction de mode
photo

Appuyez sur PHOTO MODE.

• Certaines caméras vidéo

ne sont pas dotées du
mode photo.

Vous ne pouvez pas

contrôler l'image pendant
que vous visualisez un

arrêt sur image (mémoire
photo) en appuyant deux

fois sur la touche PHOTO
MODE.

B

Lorsque vous

n'utilisez pas la

télécommande

Introduisez la fiche de la
télécommande fermement
dans la poignée de
panoramique pour empêcher
que la fiche de télécommande
ne se casse.

QO Changement de

l'angle de la tête du

trépied

Desserrez la molette de
verrouillage de la tête du
trépied et inclinez la tête du
trépied suivant l'angle voulu.

Spécifications

Charge maximum

3 kg (4 li. 6 on.)

Angle de panoramique

360 degrés

Angle d'irKiinaison

90 degrés vers le bas, 65
degrés vers le haut

Niveaux des pieds

' 4 niveaux

Commande à distance

Fonction : Début/fin
d'enregistrement, attente/
verrouillage, zoom,
Activation/désactivation
mode photo
Longueur de cordon : 320

mm (12% pouces)
Longueur de la poignée
de panoramique/
inclinaison : 270 mm (10%
pouces)

Dimensions

Hauteur maximum : env.
1.450 mm (57% pouces)
(pieds étendus et
élévateur utilisé)
Hauteur minimum : env.

480 mm (19 pouces)
Course de la colonne :
env. 240 mm (9% pouces)

Advertising