Sony SAT-A1 - Manual (Page 72)

Back Panel
Connector Description Cable Type
LOW SPEED DATA Allows you to connect your DSS receiver to new technologies, as
they are introduced. Additional accessories may be required. Depends on future
applications
(D-sub 9 pin)
SATELLITE IN Connects to the LNB on the satellite antenna. RG6 Coaxial
(75-ohm/F-type)
WIDE BAND DATA Allows you to connect your DSS receiver to new technologies
(such as high-definition television), as they are introduced.
Additional accessories may be required. Depends on future
applications
(D-sub 15 pin)
CONTROL-S
(IN/OUT)
Allows you to pass on remote control signals to another Sony
infrared-controlled audio or video component. Audio mono
miniplug
RF REMOTE Connects to the RF antenna. RCA-type
AUDIOS OUT (R)/(L) Connects your DSS receiver to the right and left audio inputs of
your audio or \>ideo component. Audio (2)
(RCA-type)
AUDIO (R)/(L)
OUT Connects your DSS receiver to the right and left audio inputs of
your audio or video component. Audio (2)
(RCA-type)
VIDEO OUT Connects your DSS receiver to your TV or VCR's video input. Video
(RCA-type)
S-VIDEO OUT Allows you to connect your DSS receiver directly to your TV (if
your TV has S-VIDEO IN). S-Video
(4-pin mini DIN)
CH3/CH4 Switch Determines the TV channel on which programs from the DSS
receiver can be viewed.
VHF/UHF IN Allows you to connect your DSS receiver to your normal
(terrestrial) TV or cable TV service. RG59 Coaxial
(75-ohm / F-type)
VHF(SAT)/UHF OUT Connects to your TV or VCR. RG59 Coaxial
(75-ohm / F-type)
TEL LINE Connects your DSS receiver to a telephone jack. This allows you to
order pay-per-view programs using the remote control. Telephone (RJ-11)
AC IN Connects your DSS receiver to a 120V AC outlet. AC
AC OUT Connects other components within a rating of AC 120V /300W /3A
max. AC
Appendix: Other Information 75