Appendix: other information 85 – Sony SAT-A1 User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Symptom
Possible Causes and Remedies
Remote control doesn't work
□
To operate your components, make sure you've programmed the remote
properly. See "Programming the Remote" on page 79. Note: The remote
codes may be erased whenever you remove the batteries. Program the
remote again if you've removed or replaced the batteries.
□
Press the appropriate FUNCTION button for the component you want to
operate.
□
Check to make sure the batteries are inserted correctly, and that the batteries
are not dead. See page 7.
□
RF problems: Check that the RF antenna is connected properly and that
you're using the remote control within operating range of the DSS receiver
(see "Setting Up the RF Antenna" on page 22). Make sure that RF
transmission is enabled (see "Selecting IR/RF Transmission" on page 69).
Make sure the DSS receiver and remote control are using the same security
code (see"Setting the Security Code" on page 70).
If you are unable to resolve problems with your system, please see
"Customer Support" on page 2 for customer support information and
telephone numbers.
Appendix: Other information 85