Dbs connections, Connecting a dbs (direct broadcast, Satellite) receiver and a vcr – Sony KV 32S40 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Connecting and Installing the TV {continued)
___________________________________ Disconnect all power sources before making any connections
DBS Connections
Connecting a DBS (Direct
Broadcast Satellite) receiver
Connect the cnble from vour satellite
antenna to s our DBS receiver.
Attach the coaxial connector from vour
cable or antenna to VHF/UHF on your TV.
Using A/V connectors, connect AUDIO
and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on vour TV.
1
2
3
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR
1
Connect the cable from your satellite
antenna to your DBS receiver.
2
Attach the coaxial connector from your
cable or antenna to VITF/UHF IN on your
VCR.
3
Using a coaxial connector, connect
VHF/UHF OUT on your VCR to
VHF/UHF on your TV.
4
Using A/V connectors, connect AUDIO
and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your VCR.
5
Using A/V connectors, connect AUDIO
and VIDEO OUT on your VCR to AUDIO
and VIDEO IN on your TV.
VMC-810S/820S (not supplied)
8