To perform auto set up again, Notes – Sony KP-61XBR200 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your New Projection TV (continued)
To perform AUTO SET UP again
• Press SET UP inside the drop-down panel
on the projection TV.
• Press CHANNEL -r, CHANNEL - or
VOLUME -I- to select a language.
• Press VOLUME - to restore factory
settings ("CONTINUE TO AUTO
PROGRAM?" will appear on the screen.
Press CHANNEL+ to execute or
CHANNEL- to exit).
• Press SET UP to exit.
Adjusting the Convergence
Automatically (AUTO FOCUS)
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
Before you use your projection TV, be sure to
adjust the convergence. The AUTO FOCUS
feature allows you to adjust the convergence
automatically.
Using the AUTO FOCUS button inside the
drop-down panel on the projection TV:
Tip -Q-
•
It is recommended to perform AUTO FOCUS about
10 minutes after the projection TV is turned on.
Press AUTO FOCUS.
o
kuro FOCUS
%
The cross pattern appears and auto
convergence works. It is completed when the
cross pattern becomes white.
Notes:
• You will not be able to perform any other
functions until AUTO FOCUS has
completed its cycle.
• Please ensure cable or antenna is connecter
before performing AUTO FOCUS.
24