Specifications, System, Recording system – Sony TC-KA3ES User Manual

Page 16: Fast winding time (approx.), Bias, Motors, Inputs, Line inputs (phono jacks), Outputs, Line outputs (phono jacks)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Additional Information

Specifications

System

Recording system

4-track 2-channel stereo

Fast winding time (approx.)

90 sec. (with Sony C-60 cassette)

Bias

Heads

AC bias

Head

(x1)

TC-KA6ES

TC-KA3ES

Erasing

S&F

S&F

Recording

SD

LA

Playing

SD

LA

Motors

Capstan motor x 1 (direct drive linear torque BSL
motor)
Reel motor x 1 (DC motor)
Assist (mechanism drive) motor x 1 (IXl motor)

Signal-to-noise ratio (at peak level, weighted, and with Dolby NR off)

Type I tape, Sony Type 1 (NORMAL): 57 dB
Type II tape, Sony Type II (HIGH): 59 dB
Type IV tape, Sony Type IV (METAL): 61 dB

S/N ratio improvement

Dolby NR on

Approximate values

B

5

dB at 1 kHz, 10 dB at 5 kHz

C

15 dB at 500 Hz, 20 dB at 1 kHz

s

10 dB at 100 Hz, 24 dB at 1 kHz

Harmonic distortion

Tape type

TC-KA6ES

TC-KA3ES

Type I tape
Sony Type 1 (NORMAL)

0.47«, (160 nWb/m 315 Hz, 3rd H.D.)

Type IV tape
Sony Type IV (METAL)

1.5% (250 nWb/m

315 Hz, 3rd H.D.)

1.3% (250 nWb/m
315 Hz, 3rd H.D.)

Frequency response (Dolby NR off)

Tape type

TC-KA6ES

TC-KA3ES

Type I tape
Sony Type I (NORMAL)

20 - 17,000 Hz
(±3 dB, lEC)

15 -17,000 Hz
(±3 dB, lEC)

Type II tape
Sony Type II (HIGH)

20-19,000 Hz
(±3dB, lEC)

15 - 20,000 Hz
(±3 dB, lEC)

Type IV tape
Sony Type IV (METAL)

20-21,000 Hz
(±3 dB, lEC)

15 - 22,000 Hz

(±3 dB, lEC)

20-16,000 Hz
(±3 dB, -4dB
recording)

15-16,000 Hz
(±3 dB, ^dB

recording)

Wow and flutter

TC-KA6ES

TC-KA3ES

±0.05 % W. Peak (lEC)

±0.04% W. Peak (lEC)

0.025 % W. RMS (NAB)

0.022% W. RMS (NAB)

±0.07 % W. Peak (DIN)

±0.065% W. Peak (DIN)

Inputs

Line inputs (phono jacks)

Sensitivity: 0.16 V
Input impedance: 47 kilohms

Outputs

Line outputs (phono jacks)

Rated output level : 0.5 V at a load impedance of

47 kilohms

Load impedance : Over 10 kilohms

Headphones (stereo phone jack)

Output level: 0 - 3 mW at a load impedance of

32 ohms

General

Power requirements

Where purchased

Power requirements

U.S.A. and Canada

120 VAC, 60 Hz

Europe

220 - 230 V AC, 50/60 Hz

Other countries

120, 220 or 240 V AC adjustable.

50/60 Hz

Power consumption

30 w

Dimensions (approx.) (w/h/d)

430

X

135

X

360

mm

(17x 5 ’/a x 14

’/r inches)

inch projecting parts and controls

Mass (approx.)

7.6 kg (16 lbs 13 oz)

Supplied accessories

Audio connecting cords (2)
Remote commander RM-J701 (1)*
Sony batteries SUM-3(NS) (2)*

’ Canadian model only

Design and specifications are subject to change without
notice.

16

Advertising