Tools you may need, Door handle removing, Removing refrigerator handle – LG LFC25765 User Manual
Page 10: Removing freezer drawer handle, Door handle installation, Reinstalling refrigerator handle, Reinstalling freezer drawer handle, Refrigerator installation, V4 in
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REFRIGERATOR INSTALLATION
TOOLS YOU MAY NEED
1
10 mm
V4 in
3/8 in
Hex Socket Wrench
Phillips Screwdriver Flat Head Screwdriver
'
1/4 in
3 / 3 2 i n
Allen Wrench
NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a
narrow opening. If it is necessary to remove the handles follow the directions below.
NOTE: Handle appearance may vary from illustrations on this page.
DOOR HANDLE REMOVING
1. Removing Refrigerator Handle
Loosen the set screws with the 3/32 ” Allen wrench
and remove the handle.
• NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 " Allen wrench.
2. Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with the Vs” Allen wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a I
/ 4
” Allen wrench.
DOOR HANDLE INSTALLATION
1. Reinstalling Refrigerator Handle
Place the handle on the door by aligning
handle footprints to fit mounting fasteners and
tighten the set screws with a
"
Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 ” Allen wrench.
2. Reinstalling Freezer Drawer Handle
Place the handle on the door by aligning
handle footprints to fit mounting fasteners and
tighten the set screws on the bottom of the
handle with a
1
/
3
" Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a I
/ 4
" Allen wrench.