Cabletron Systems Expansion module 9T122-08 - Manual (Page 6)

9T122-08 Module Specific Information
4
General Configuration Screen Fields
The following information brießy explains each General ConÞguration Screen
Þeld.
Module Serial #
Displays the serial number of the selected module.
Module Board Revision
Displays the version number of the selected module.
FLASH Memory
Displays the amount (megabytes) of ßash memory in the selected module.
Module Date
Contains a value that the module recognizes as the current date. To enter a new
date, highlight the Þeld and enter the date in MM/DD/YYYY format. The month
and day portion of the date must include two digits. Therefore, enter a leading
zero for months January through September, and for dates less than 10. For
example, for June 4, 1996, enter 06/04/1996 (slashes are optional). If you do not
enter slashes to separate the month, day, and year values, the Þrst eight digits you
enter in this Þeld represent an entry (i.e., 06041996).
Module Time
Contains a value that the module recognizes as the current time. To enter a new
time, highlight the Þeld and enter the time in HH:MM:SS format. Notice that
there is no AM/PM indicator. Time should be entered based upon a 24 hour clock.
For 4:07 p.m., enter 16:07:00 (colons are optional). If you do not enter colons to
separate the hours, minutes, and seconds values, the Þrst six digits you enter in
this Þeld represent an entry (i.e., 160700). For 6:12 a.m., enter 6:12:00 or 061200.
Screen Refresh Time
Contains the rate at which the moduleÕs screens are updated. This setting
determines how frequently (in seconds) information is updated on the screen. To
enter a new refresh rate, highlight the Þeld and enter a number. The
default
refresh rate is 3 seconds. The range is 3 - 99 seconds.
The moduleÕs default date and time settings are indeterminate. The internal
calendar and clock begin running as soon as you install the module.
NOTE