Cabletron Systems Expansion module 9T122-08 - Manual (Page 8)

9T122-08 Module Specific Information
6
Default Interface (Toggle)
Contains the number that represents the interface that is connected to the
moduleÕs Default Gateway. In some instances, dissimilar modules have different
corresponding interface numbers. For example, if you are assigning a default
interface to a 9T122-08 module and you enter a 3, then the default interface is the
Flexible Network Bus. However, if you are assigning a default interface to a
9F310-02 module and you enter a 3, then the default interface is the Internal
Network Bus. See Table 1 for module-speciÞc interface information. The
default
is NONE, meaning no default interface selected.
Base MAC Address
Displays the MAC Address of the selected module. This is the MAC Address of
the SMB-10 interface.
TFTP Gateway IP
The IP address of the router that connects to or is closest to the module. ConÞgure
this address when you are performing TFTP downloads in a routed environment
(if proxy ARP is disabled on the router).
The Default Interface Þeld becomes active after you enter an IP address in the
Default Gateway Þeld.
NOTE