Muffler, Spark plug{s), In-line fuel filter – Craftsman 917.276320 User Manual

Page 20: Cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MUFFLER

inspect and replace corroded muffler and
spark arrester {if equipped) as it could cre­
ate a fire hazard and/or damage.

SPARK PLUG{S)

Replace spark plug(s) at the beginning
of each mowing season or after every

100 hours of operation, whichever occurs

first. Spark plug type and gap setting are

shown in “PRODUCT SPECIFICATIONS”
section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once

each season. If fuel filter becomes
clogged, obstructing fuel flow to carbu­
retor, replacement is required.

1. With engine cool, remove filter and

plug fuel line sections.

2. Place new fuel filter in position in fuel

line with arrow pointing towards carbu­
retor.

3. Be sure there are no fuel line leaks and

clamps are properly positioned.

4. Immediately wipe up any spilled gaso­

line.

Clamp

Clamp

Fuel Filter

CLEANING

• Clean engine, battery, seat, finish, etc.

of all foreign matter.

• Keep finished surfaces and wheels free

of ail gasoline, oil, etc.

• Protect painted surfaces with auto­

motive type wax.

We do not recommend using a garden

hose or pressure washer to clean your

tractor unless the engine and transmis­

sion are covered to keep water out. Water
in engine or transmission will shorten the
useful life of your tractor. Use compressed
air or a leaf blower to remove grass,
leaves and trash from tractor and mower.

20

Advertising