Craftsman 900.370511 - Manual (Page 7)

ik WARNING: For your own safety DO
NOT use this mower without either the
Grasscatcher or Mulch Insert in operating
position.
GRASSCATCHER ASSEMBLY
• Slide the grassbag onto the grasscatcher
frame. (See Fig. A)
• The grassbag has attachment clips sewn
around the bag opening.
• Attach the two top ciips to the frame,
then attach the side clips, and lastly the
bottom clip. (See Fig. B)
• Refer to “To Install Grasscatcher”
instruction before attaching to mower.
TO INSTALL GRASSCATCHER
• Reach down between the mower handle
and raise the rear door to a vertical
position. (See Fig. A)
• Remove the mulch Insert. See page 11
To Remove Mulch Insert.
• Pick up the grasscatcher by the handle
and lower the grasscatcher between the
lawnmower handies. Position the
grass- catcher hanger hooks on the
metal rod under the rear door.
(See Fig. B).
• Release the rear door.
A WARNING: Never operate the mower
unless the hanger hooks on the
grasscatcher are seated properly, and the
rear discharge door rests firmly against
the top of the grasscatcher.