Recoil starter handle, Throttle control, Ik warning – Craftsman 247.29931 User Manual
Page 10: Choke control, Meets ansi safety standards, Operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Now that you have set up your tiller tor operation, get aquainted with its
controls and features. These are described on the next two pages and
illustrated on this page. This knowledge will allow you to use your new
equipment to its fullest potential.
RECOIL STARTER HANDLE
This handle is used to start the engine. See Figure 5.
THROTTLE CONTROL
The throttle control is located on the front of the engine. It regulates the
spread of the engine and will shut off the engine when moved into the
STOP position. See Figure 5.
ik WARNING
The operation of any tiller can result in foreign objects being thrown
into the eyes, which can damage your eyes severely. Always wear the
safety glasses provided with this unit or eye shields before tilling and
while performing any adjustments or repairs.
CHOKE CONTROL
The choke control is activated by moving the lever to the CFIOKE
position. Activating the choke control closes the choke plate on the
carburetor and aids in starting the engine.
Meets ANSI Safety Standards
Craftsman Tillers conform to the safety standard of the American National Standards Institute (ANSI).
10