Cobra Electronics COBRA XRS 9550G - Manual (Page 16)

English 26
User Locations and GPS Settings
GPS Locator
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra ® 27
GPS Settings
GPS Locator
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
GPS Alerts
When a Location-Based Alert other than a Known Speed Trap is activated, the screen
will show the distance between your vehicle and the Location as Zones 1, 2, and 3
with Zone 1 being the furthest from the location.
Location
Distance
Chart
Zone 1 Zone 2
User Locations
•
The GPS Locator database is populated with all the Photo Enforcement, Caution Area
and Known Speed Trap locations known at the time of its last update.
You can add
User Locations of your own to alert you to places other than those
in the Photo Enforcement, Caution Area, and Known Speed Trap categories.
Whenever your vehicle approaches a user set location, the alarm chime will
sound and the screen will show User Location.
n
To set a User Location:
With the GPS Locator unit connected to the detector, press and hold the
Mark/Dim button for two seconds when your vehicle is at a Location
you want to set.
n
To delete a specific User Location:
While a User Location Alert is sounding at a Location you have set,
press and hold the Mark/Dim button for two seconds.
Known Speed Traps
These are areas where it is known that mobile enforcement units are frequently
deployed. If you do not want to receive Speed Trap alerts while the GPS Locator
is connected, you can turn them Off. The factory default is Speed Traps On.
Speed Units
Speed units can be selected as miles per hour (mph) or kilometers per hour
(km/h). The factory default is mph.
GPS Settings
•
All of the settings associated with the GPS Locator except Known Speed Trap
Locations and IntelliScope are always On and cannot be selectively turned Off.
If you do not want to hear or see alerts for Photo Enforcement, Caution Area
and User Locations, simply remove the GPS Locator from the unit. This will
also remove the Compass and Speed information.
All radar and laser alerts will continue to function even when the GPS Locator
is removed.
Photo Enforcement Areas
These are fixed red light and speed cameras.
Caution Areas
These are high-accident intersections and other dangerous locations.
To Turn Off and On Speed Trap Alerts
With the GPS Locator
connected and unit
power Off, press and
hold the Mark/Dim
button. Then turn the
power On and
continue to hold the
Mark/Dim button
for two seconds.
Tone Voice Visual Display
Speed Trap Alerts
Off = One beep
Speed Trap Alerts
Off
Speed Trap Alerts Off
blinks in the display
Speed Trap Alerts
On = Two beeps
Speed Trap Alerts
On
Speed Trap Alerts On
blinks in the display
To Toggle Between mph and km/h
With the GPS Locator
connected and unit
power Off, press and
hold the City/Hwy
button. Then turn the
power On and continue
to hold the City/Hwy
button for two seconds.
Tone Voice Visual Display
None Miles per hour mph
None Kilometers per
hour
km/h