Cobra Electronics COBRA XRS 9550G - Manual (Page 8)

English 10
Settings
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra ® 11
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
IntelliMute
IntelliMute is a unique feature that allows you to avoid alerts you don’t need to hear
because you are stopped or moving slowly. By sensing the “revs” (RPMs) of your
engine, IntelliMute knows when you are at low speed and automatically mutes alerts.
Before IntelliMute will work, you must set an activation point for your engine’s revs (see
page 11). Whenever the revs are below that point, IntelliMute will begin muting. The
activation point will be stored in memory and recalled each time the power is turned
On. The factory setting is IntelliMute Off.
IntelliMute Button
Press and release
To Turn IntelliMute Off
Press and release
the IntelliMute
button again.
Tone Voice Visual Display
One beep IntelliMute Off IntelliMute Off blinks
in the display
To Turn IntelliMute On
Press and release
the IntelliMute
button.
Tone Voice Visual Display
Two beeps IntelliMute On IntelliMute On blinks,
then i appears in the
display
i h
IntelliMute On
NOTE
IntelliMute may not work with some vehicles because it cannot sense the
engine’s revs. In such cases, you can reduce unwanted audio alerts by
using Auto Mute and City mode when appropriate.
What to Remember While Using IntelliMute
IntelliMute works with both City and Auto Mute modes. Whenever engine revs are
below the activation point, an arrow pointing down will appear in the display. Above
the activation point, an arrow pointing up will appear.
If, for any reason, the unit stops sensing your engine’s revs, IntelliMute will indicate
an error and automatically turn Off. The rev point you set will be stored
in the unit’s memory when power is turned Off and recalled each time the power
is turned On.
NOTE
The rev point must be reset if you use your detector in a different vehicle.
NOTE
When initially choosing your IntelliMute activation point, a setting of
approximately 300 to 600 RPMs above idle is recommended. You can
reset the activation point at any time to fit your individual preferences
and driving style.
Setting the IntelliMute Activation Point
Your detector must be installed in your vehicle.
IntelliMute must be turned On before setting the activation point. Depending on
whether the unit is in Tone Alert or Voice Alert mode, you will hear a series of
beeps or voice messages as you follow the steps on the next page.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
i h
Below Activation Point
CAUTION
Do not attempt to set the rev point while driving. Your vehicle should
be parked and idling.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons