Operation – Craftsman 247.88110 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lockout Lever
Engaged Position
FIGURE 23. DRIVE MECHANISM ENGAGED
FIGURE 24 BLADE ENGAGED
4. Figures 23 and 24 show lockout levers engaged and
locked over center.
OPERATION
CAUTION
Stop the engine and disconnect the
spark plug wire from the spark plug
before making any adjustments. See
figure 25.
FIGURE 25. SPARK PLUG WIRE BEING REMOVED
1.
Blade Spindle Assembly—The blade spindle as
sembly is equipped with a grease fitting. Use grass
discharge chute for access to the fitting located un
der the deck. Use multi-purpose grease. Lubricate
PRIOR to initial use and every 25 hours thereafter.
See figure 26.
CAUTION: Be sure spark plug wire is disconnected
and grounded. See figure 25.
FIGURE 26. INITIAL LUBRICATION OF BLADE SPINDLE
ASSEMBLY
11