Craftsman 486.24611 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
STEP 2
:
(SEE FIGURE 3)
•
Remove tractor hood. (Refer to tractor manual.)
•
Remove an (LT) Lawn Tractor heat shield like the one
shown. Remove a (GT) Garden Tractor heat shield
like the one shown only if you need access to inside
of tractor frame during step 5.
IMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
STEP 3: (SEE FIGURE 4)
• Place plug on a work bench or solid table and push
end of bumper down onto plug. Repeat for all plugs.
Call 1 -866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
Advertising