Craftsman 315.11910 - Manual (Page 5)

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter­
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
a. Alternating Current Type of current
-
Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
11 Class II Tool Double-insulated construction
,,,/min Per Minute Revolutions, strokes, surface speed, orbits etc,, per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand oper­
ator’s manual before using this product.
0
Eye Protection
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
A
Safety Alert Precautions that involve your safety.
®
No Hands Symbol
Failure to keep your hands away from the blade will result in seri­
ous personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in seri­
ous personal injury.
#
No Hands Symbol
Failure to keep your hands away from the blade will result in seri­
ous personal injury.
A
No Hands Symbol
Failure to keep your hands away from the blade will result in seri­
ous personal injury. 0
Hot Surface
To reduce the risk of injury or damage, avoid contact with any hot
surface.