Craftsman 536.886260 - Manual (Page 11)

OPERATION
KNOW YOUR SNOW THROWER
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Electric
Start
Button
Traction Drive Lever
{left hand)
Remote
Chute Control
--Crank
Assembly
Chute Deflector
Choke
Control
Throttle
Control
1
Recoil .. itfl
Starter H®'ght W
Figure 10
Auger Drive Lever - Starts and stops
the auger and impeller (snow gathering
and throwing)
Traction Drive Lever - Pr^eis the
snow thrower fonvard and in reverse.
Speed Shifter Lever - Selects the
speed of the snow thrower (6 speeds for­
ward and 2 speeds reverse).
Crank Assembly - Changes the direction
of snow throwing through the discharge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute — Changes the height
and direction the snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start
the engine.
Recoil Starter Handle - Starts the en­
gine manually.
F-001088J 11
Choke Control - Used to start a cold
engine.
Primer Button - Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Remote Chute Control Lever - Push
fonvard to discharge snow high and far.
Pull remote lever back to discharge snow
down.
Throttle Control - Contrds the engine
speed.
Electric Start Button - (if so equipped)
Used to start the engine using the 120 V elec-
tic starter.
Shear Pin -Shear pins are designed to
break {to protect the machine) if an ob­
ject becomes lodged in the aguer hous­
ing.
Toolbox -spare shear pins and spacers
are located in toolbox.