Craftsman 247.370252 - Manual (Page 7)

ASSEMBLY
ATTACHING GRASS CATCHER TO MOWER
Lift the rear discharge door on the mower. Make cer­
tain the mulching baffle has been removed. Place the
hooks on the grass catcher into the slots in the handle
-bracket assemblies. See figure 3. Release the rear
discharge door.
To remove the grass catcher, lift the rear discharge
door on the mower. Lift the grass catcher up, out of
the slots in the handle bracket assemblies. Release
the rear discharge door.
A
WARNING: NEVER OPERATE MOWER
UNLESS HOOKS ON GRASS CATCHER
ARE SEATED IN SLOTS ON HANDLE
BRACKET ASSEMBLIES, AND REAR DIS­
CHARGE DOOR RESTS FIRMLY AGAINST
TOP OF GRASS CATCHER.
OPERATION
KNOW YOUR LAWN MOWER
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER.
Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and
adjustments. Save this manual for future reference.
’ Motor/Blade Control
Handle
Upper
Handle
Mulching Baffle
Grass
Catcher-
'Cord Restraint
- Handie Insuiators
-Hand Knob
Grass Catcher
Handie
Lower Handle
Rear Discharge
Door
Wheel
Adjuster
Deck
MEETS CPSC BLADE SAFETY REQUIREMENTS
Sears Lawn Walk-Behind Mowers conform to the safety standards of the American National Standards Institute,
Underwriters Laboratories, inc., and the U.S. Consumer Product Safety Commission. The blade turns when the
motor is running.