Know your grass catcher, Unpacking instructions, Carton contents – Craftsman 917.24985 User Manual

Page 4: Parts identification, Tools required for assembly

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

KNOW YOUR GRASS CATCHER

READ THISOWNER'S MANUAL ANDSAFETYRULESBEFOREASSEMBLING OR OPERATINGYOURGRASS CATCHER.
Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study

the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to

prevent injury to yourself and others. Save this manual for future reference.

FORESIGHT IS BEHER

THAN NO SIGHT

The operation of any tractor can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye shields
before starting your tractor and while mowing. We recommend a wide vision safety
mask for over the spectacles or standard safety glasses.

UNPACKING INSTRUCTIONS

Remove all parts and packing materials from carton.

Check carton contents against list. Be sure all parts
are there.

CARTON CONTENTS:

(3) Container Tops
(3) Container Bottoms
(1) Upper Chute
(1) Lower Chute

PARTS IDENTIFICATION

COVER
ASSEMBLY

TOOLS REQUIRED FOR ASSEMBLY

{1)9/16" Wrench

SHOULDER

(1) Support Assembly
(1) Cover Assembly
(2) Shoulder Bolts
(1) Retainer Spring

FULL

BAGGER
INDICATOR

GRASS
CATCHER
CONTAINERS

CHUTE LATCH

LOWER CHUTE

LOWER CHUTE

ATTACHING
STRAPS

NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the

tractor, in the operator's position.

A

CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:

Depress clutch/brake pedal fully and set parking brake.

Place gearshift/motion control lever in "NEUTRAL" position.

Place attachment clutch in "DISENGAGED" position.

Turn ignition key "OFF" and remove key.

Make sure the blade and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.

Advertising