Country Home Products DR - Manual (Page 23)

DR  COMMERICAL LEAF and LAWN VACUUM Safety & Operating Instructions 19
Lawn Deck Adapter Installation
The following procedure includes the steps necessary for connecting the DR LEAF and
LAWN VACUUM Blower Inlet Hose to your lawn tractor.
Tools Needed:
1/2" Wrench or Socket
Drill with 3/8" Bit
Saw
1. Install your lawn deck adapter (available from the manufacturer of your lawn tractor)
on your lawn tractor.
Note: Optional Accessories – Due the variety of lawn tractors, the hose kits supplied may
not fit all tractors. Our Technical Service Dept. can help you adapt to your
machine.
- A Universal Deck Adapter is available for you to fit to your machine if the
tractor manufacturer’s lawn deck is not available.
- A Lawn Deck Adapter Extension is available to attach to a small deck adapter
and support the vacuum hose.
1. Mark the distance of approximately 23" from the ground to the top surface of your
lawn deck adapter exit tube (Figure 20).
2. Remove the lawn deck adapter from your lawn tractor and using a saw, cut the exit
tube of the lawn deck adapter at 90° (Figure 20).
Figure 20