Compex Technologies WP11A+ - Manual (Page 52)

Chapter 7 Setting up WAN using Wireless Routing Client
42
4. Next, click on the “Apply” button to proceed to the Wireless Routing Client Setup.
Figure 7.2b Wireless Routing Client Setup
5. Next, you have the option to choose either 64-bit or 128-bit for WEP Encryption
from the WEP Setup as shown below. Select your option and click on the “Apply”
button.
Figure 7.2c Selecting WEP encryption method
Tx Power
Tx Power indicates power transmit to
the wireless broadcast. The higher the
number (15db), the more powerful it is.
Signal Strength
Indicates the strength of the
signal. 100% will be in the full
strength.