Compex Technologies WP11A+ - Manual (Page 73)

Chapter 10 Routing
63
You will set the desired Destination IP Address and the Gateway IP Address.
2. Click “Apply” button to save your changes. You need to save and reboot your
gateway.
Figure 10.2b Adding Static IP Routing
Destination IP Address
A remote network IP address to
which you want to assign the static
route. For example, if you want to
route your WP11A to your entire
LAN, you may enter the IP
address as 192.168.168.0.
Gateway IP
The IP address that provides the
gateway between Compex WP11A
and the remote network.