Craftsman 917.28035 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
ATTACH MOWER SIDE SUSPENSION
ARMS
(A)
TO
CHASSIS-Position
hole
in arm over pin (B) on outside of
tractor
chassis and secure with retainer spring.
4. Repeat on opposite side of tractor.
5.
ATTACH REAR LIFT LINKS (C)-Lift rear
corner of mower and position slot in link
assembly over pin (D) on rear mower
bracket
and
secure
with
washer
and
retainer spring.
6.
ATTACH
FRONT
LINK
(E)-Work
from
left side of tractor. Insert rod end of link
assembly
through
front
hole
in
tractor
front suspension bracket (F).
7. Insert end of link (E) into hole in front
mower
bracket
(H)
and
secure
with
washer and retainer spring (J).
8. Hook end of clutch cable spring (0) into
hole in idler arm (R).
9. Push clutch cable housing guide (P) into
bracket.
10. Install belt onto engine pulley (M) and belt
keepers (G).
IMPORTANT: Check belt for proper routing
in all mower pulley grooves.
11. Raise attachment lift lever to highest
position.
12. If necessary, adjust gauge wheels before
operating mower as shown in the Opera-