Craftsman 917.273481 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING CHART:

See appropriate section in manual unless directed to Sears service center

PROBLEM

CAUSE

CORRECTION

Loss Of power

3. Build-up of grass, leaves

3. Clean underside of mower

(continued)

and trash under mower.

housing.

4. Dirty air filter.

4. Clean/replace air filter.

5. Low oil level/dirty oil.

5. Check oil level/change oil.

6. Faulty spark plug.

6. Clean and regap or change

spark plug.

7. Dirty fuel filter.

7. Replace fuel filter.

8. Stale or dirty fuel.

8. Drain fuel tank and refill

with fresh gasoline.

9. Water in fuel.

9. Drain fuel tank and

carburetor, refill tank with
fresh gasoline and replace
fuel filter.

10. Spark plug wire loose.

10. Connect and tighten spark

plug wire.

1

1

. Dirty engine air screen/fins. 11. Clean engine air screen/

fins.

12. Dirty/clogged muffler.

12. Clean/replace muffler.

13. Loose or damaged wiring.

13. Check all wiring.

14. Carburetor out of

14. See “To Adjust Carburetor”

adjustment.

in Service and Adjustments

section.

15. Engine valves out of

15. Contact a Sears or other

adjustment.

qualified service center.

Excessive

1. Worn, bent or loose blade.

1

Replace blade.

vibration

Tighten blade bolt.

2. Bent blade mandrel.

2. Contact a Sears or other

qualified service center.

3. Loose/damaged part{s).

3. Tighten loose part{s).

Replace damaged parts.

Engine continues

1. Faulty operator-safety

1. Check wiring, switches and

to run when

presence control system.

connections, if not corrected,

operator leaves

contact a Sears or other

seat with
attachment
clutch engaged

qualified service center.

Poor cut - uneven

1. Worn, bent or loose blade.

1

Replace blade. Tighten

blade bolt.

2. Mower deck not level.

2. Level mower deck.

3. Buildup of grass, leaves.

3. Clean underside of mower

and trash under mower.

housing.

4. Bent blade mandrel.

4. Contact a Sears or other

qualified service center.

5. Clogged mower deck vent

5. Clean around mandrels to

from build-up of grass,
leaves, and trash around
mandrels.

open vent holes.

Mower blades will

1. Obstruction in clutch

1. Remove obstruction.

not rotate

mechanism.

31

Advertising