Mowing tips – Craftsman 917.258010 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MOWING TIPS

• Mower should be properly leveled for

best mowing performance. See TO

LEVEL MOWER HOUSING” in the

Service and Adjustments section of this

manual.

• The left hand side of mower should be

used for trimming.

• Drive so that clippings are discharged

onto the area that has already been

cut. Have the cut area to the right of the

tractor. This will result in a more even

distribution of clippings and more
uniform cutting.

• When mowing large areas, start by

turning to the right so that clippings will
discharge away from shrubs, fences,
driveways, etc. After one or two

rounds, mow in the opposite direction
making left hand turns until finished.

If grass is extremely tall, it should be
mowed twice to reduce load and
possible fire hazard from dried clip­
pings. Make first cut relatively high; the

second to the desired height.

Do not mow grass when it is wet. Wet

grass will plug mower and leave

undesirable clumps. Allow grass to dry
before mowing.

Always operate engine at full throttle
when mowing to assure better mowing

performance and proper discharge of
material. Regulate ground speed by

selecting a low enough gear to give the

mower cutting performance as well as

the quality of cut desired.
When operating attachments, select a

ground speed that will suit the terrain
and give best performance of the
attachment being used.

16

Advertising