Vertical Communications and FXT - Manual (Page 113)

Screened Call Transfer
Allows users to first announce and then transfer both line and intercom calls from
one station or group to another.
Service Observing
Class of service programming option allows users to enter an in-progress call in
an unannounced muted mode to monitor the call.
Speed Dialing
Autodialing using the keypad buttons. Speed dialing can be station calls
(personal and accessed by only one specific user) or system calls (numbers used
and accessed by anyone in the system).
Station
A single system telephone with an individual identity and feature set assigned by
the programmer.
Station Message Detail Accounting (SMDA)
Station message detail accounting provides a record of the incoming and
outgoing calls handled by the system on selected lines. This record provides
information for accounting and traffic analysis studies.
Subdued Off-Hook Voice Announce (SOHVA)
A private announcement that can be made to a busy party which they hear
through the receiver of their handset.
System Alarm Reporting
Allows you to view (through the LCD telephone screen) the various system
alarms and the stations with which those alarms are associated.
System Speed Dial
System speed dialing provides system users with a repertory of up to 500
numbers that they can dial from any telephone in the system. The installer or the
attendant is responsible for storing the system speed dial numbers.
T
TAP (Flash/Recall)
Depending on your system’s programming, this button gives you a fresh dial tone
or activates a hookflash.
Toll Restriction
Class of service feature by which the system allows or denies outgoing calls to
selected users over selected lines.
Tone Call
A ringing intercom call.
Large Screen Display Speakerphone Station User’s Guide 105
GCA70-349 Glossary