Vertical Communications and FXT - Manual (Page 59)

Nonverbal Messaging
LCD Message Delivery
You can set system-supplied messages at your station to be received and
displayed by a calling LCD speakerphone.
• To turn on a message from your
telephone,
1. SELECT OPTIONS.
2. SELECT Programming.
3. SELECT NEXT.
4. SELECT LCD MESSAGING.
5. SELECT the message you would like to appear
in a calling party’s LCD by SELECTING the corresponding
interactive button. In addition to the five options shown below,
there are 25 more options available to be programmed.
• SELECT Back at and enter the time you will be back to
display “Back at xxxx” on the LCD display.
For example: dial
#00 01 29 0405
for the time 01:45).
• SELECT Call to and enter the extension number to call to
display “Call and the extension number” on the LCD dis-
play.
For example: DIAL
#0907081502
0000
for the number 978-2200.
Large Screen Display Speakerphone Station User’s Guide 51
GCA70-349 Nonverbal Messaging
5
Back at
PREV NEXT EXIT
I will call back
Call
out to lunch
Take a message