Craftsman 917.273060 User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TRÔUBLÉSHOOTING CHART

PROBLEM

CAUSE

CORRECTION

Will not start

• Out of fuel.

• Rll fuel tank.

• Engine not “CHOKED* prop­

erty.

• See TO START ENGINE" in

Operation section.

• Engine flooded.

• Wait several minutes before

attempting to start.

* Bad spark plug.

• Replace spark plug.

• Dirty air filter.

• Clean/replace air filter.

• Dirty fuel filter.

• Replace fljet filter.

• Water in fuel.

• Drain fuel tank and carburetor,

refill tank with fresh
gasoline and replace fuel filter.

• Loose or damaged wiring.

• Check all wiring.

• Carburetor out of adjustment.

• See To Adjust Carburetor” in

Service and Adjustments
section.

• Engine valves out of adjust­

ment.

• Contact an authorized service

center.

Hard to start

• Dirty air filter.

• Clean/replace air filter.

• Bad spark plug.

• Replace spark plug.

• Weak or dead battery.

• Recharge or replace battery.

• Dirty fuel filter.

• Replace fuel filter.

• Stale or dirty fuel.

• Drain fuel tank and refill with

fresh gasoline.

• Loose or damaged wiring.

• Check all wiring.

* Carburetor out of adjustment.

* See ToAdjust Carburetor" in

Senrice aixl Adjustments

section.

* Engine valves out of adjust­

ment.

• Contact an authorized service

center.

Engine will not turn

over

• Clutch/brake pedal not

depressed.

• Depress clutch/brake pedal.

• Attachment clutch is engaged.

• E^sengage attachment clutch.

• Weak or dead battery.

• Rediarge or replace battery.

• Blown fuse.

• Replace fuse.

• Corroded battery terminals.

• Clean battery terminals.

• Loose or damaged wiring.

• Check all wiring.

* Faulty Ignition s^tch.

• Check/raplace ignition switch.

• Faulty solenoid or starter.

• Check/raplace solenoid or

starter.

• Faulty operator presence

switch{es).

• Contact an authorized service

center.

Engine clidts but will

• Weak or dead battery.

• Recharge or replace battery.

•lot start

• Corroded battery terminals.

• Clean battery terminals.

• Loose or damaged wiring.

• Check all wiring.

• Faulty solenoid or starter.

• Check/replace solenoid or

starter.

32

Advertising