Nikon AI Micro-NIKKOR 105mm f-4 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

With Built-in TTL Metering

The Micro-Nikkor has a fully automatic dia­

phragm with settings from f/4 to f/32. The
Micro-Nikkor couples fully to the thru-the-
lens meter of any F/F2 Nikon Photomic or

other Nikon/Nikkormat cameras for full aper­
ture exposure measurement over the entire

range of aperture settings. Note that when

this lens is used with non-AI cameras, con­

ventional “manual” maximum aperture in­
dexing is required.

When close-up attachments such as a PN ring

or bellows are used, the exposure measure­

ment method is shown in the table on the left.

When the lens is mounted in the reverse posi­

tion, the stop-down method should be used.

See the instruction manual supplied with your
camera or Photomic viewfinder for details.

Caution;

When

the

stop-down

method

is

used

at

smaii apertures, a finder eyecup should be attached

to

the

eyepiece

to

ensure

complete

exclusion

of

stray light.

Advertising