Focus lock button d, Focus lock button – Nikon AI-S TC-16- TC-16S User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

(1 ) Turn the focusing ring of the prime lens clockwise (i.e., while maintain­

ing shooting position) until both LED in-focus indicators (►◄) light up.

(2) Confirm the position of the distance scale set in Step 2 and the

position reset at Step (1).

(3) During autofocus operation, move the distance scale slightly between

these two positions in accordance with the camera-to-subject dis­

tance, and make the final adjustment with the TC-16 until both LED
in-locus indicators (►◄) light up.

' [It is also possible for the LED in-focus-impossible warning indicatori x)

to light up as a result of low subject contrast. For further information, refer

to the F3AF camera body’s instruction manual,]

FOCUS LOCK BUTTON----------------------------------------

D

Your TC-16 is equipped with a focus lock button (X). Depressing this button

during autofocus operation will automatically lock or fix the distance in focus.
Autofocus restarts the instant you release the button. To take pictures with the

main subject off-center, foilow these procedures:

1. First, center the main subject within the viewfinder's central focusing frame.

2. Lightly touch the shutter release button of the F3AF camera body and make

sure both LED in-tocus indicators light up; then depress the focus lock
button.

3. While holding the focus lock button, recompose the picture, and depress

the shutter release button to take the picture.'

Notes:

1. When the focus iock button is depressed, the F3AF camera body’s meter

and the DX-1 AF Finder's autofocus detecting system are automatically shut
off to save power; you have to lightly touch the camera’s shutter release

button once more to activate both; even if at times the LED in-focus indi­

cators (►◄) do not light up, focus stays locked.

2. Sometimes, the LED indication may change after the mirror returns to its

original position upon shutter release while the focus lock button is de­
pressed: the focus stays locked.

3. The focus stays locked as long as you keep the focus lock button de­

pressed; autofocus operation automaticaliy restarts the instant you take
your finger off the button.

Advertising