Nikon f2 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
place and insert the end of the film leader into any of
the slots in the film take-up spool. If necessary, release
the shutter and, then, stroke the film-advance lever slow
ly to make sure that the leader winds smoothly on the
spool and that the film edge perforations engage with
the film sprocket roller. When satisfied that the film is
properly feeding and is traveling correctly along the film
guide rails, close the camera back and return the 0/C
key to its normal storage position. (Also, see “Tips on
Camera Care” on page 36.)
Advertising