Determining exposure, With built-in ttl metering, Determining exposure -13 – Nikon AI-S Micro-NIKKOR 105mm f-2.8 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DETERMINING EXPOSURE--------------
With built-in TTL metering
The
Micro-Nikkor
105mm
f/2.8
has
a
fully
auto
matic
diaphragm
with
settings
from
f/2.8
to
f/32.
The
lens
couples
fully
to
the
through-the-lens
meter
of any Nikon AI or F/F2 Photomic camera for full
aperture
exposure
measurement
over
the
entire
range
of aperture settings.
When
close-up
attachments
such
as
a
PN
ring
or
bellows
are
used,
the
exposure
measurement
method
is shown in the table at the right.
•
When the lens is mounted in the reverse position,
the stop-down method should be used. (For details,
check your camera’s instruction m anual).
•
When the stop-down method is used at small aper
tures, attach a finder eyecup to the eyepiece so no
stray light will enter.
12