Nikon AF DC-Nikkor 105mm f/2 D - Manual (Page 5)

LENS CARE
• Clean lens surface with a blower brush. To remove dirt and smudges, use a
soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from center to outer edge, taking care not to
leave traces and not to touch the other lens parts.
• Never use thinner or benzine to clean the lens.
• To protect the lens surface from dirt or damage, use of an NC filter is
recommended at all times. The lens hood also helps protect the lens.
• Cover lens with lens cap when lens is not in use.
• Attach both front and rear caps when the lens is stored separately.
• If you will not use the lens for a long time, protect it from rust and mold by
storing it in a cool, dry place. Also, do not store in direct sunlight, and keep it
away from naphthalene or camphor.
• Be careful not to get the lens wet or drop it in water. Water on the lens may
cause malfunction.
• Reinforced plastic is used on the exterior of the lens unit; to avoid damage,
take extra care to never leave the lens in an excessively hot place.
SPECIFICATIONS
Focal length:
Maximum aperture:
Lens construction:
Picture angle:
Distance scale:
Distance imformation:
Aperture scale:
Minimum aperture lock:
Diaphragm:
Focusing:
Exposure measurement:
Mount:
Attachment size:
Dimensions:
Weight:
105mm
f/2
6 elements in 6 groups (plus built-in rear glass plate
for dust protection)
23“20'
Graduated in meters and feet from 0.9m (3 ft.) to
infinity (oo)
Output into camera body
f/2 to f/16 on both standard and aperture-direct-
readout scales
Provided
Fully automatic
Nikon Rear Focusing (RF) system
Via full-aperture method for Al cameras or cameras
with CPU interface system; via stop-down method for
other cameras
Nikon bayonet mount
72mm (P = 0.75mm)
Approx. 79mm dia. x 111mm extension from the
camera’s lens mounting flange; overall length is
approx. 119mm
Approx. 620g
OPTIONAL ACCESSORIES
72mm screw-in filters
Hard lens case CL-38
Flexible lens pouch CL-S3^S4
12