Mercury battery loading – Canon Model 7S User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
MERCURY BATTERY LOADING
Load the mercury battery into the battery com
partment. Since the mercury battery powers the
built-in CdS meter, the meter will not function
unless the battery is in position.
1. To remove the battery cover, turn to the left
by using a coin.
contact of the mercury bat
insert, then screw the cover
2. Face the central
tery inwards and
back in.
When inserting, do
not confuse the r’-fj Not
only will the meter fail to function in case of re-
Advertising