Lens attachment – Canon EOS 1N RS User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. Lens Attachment
j Remove the lens' rear dust cap and
the camera's body cap by turning
them counterclockwise.
2 Align the red dots on the lens and
camera body, then rotate the lens
clockwise until it locks in place with
a click.
3 Set the lens’ focus mode switch to
“AF”.
• Autofocus is not possible when the
switch is set to “M”.
• During autofocusing, do not touch the
rotating part of the lens.
4 Remove the front lens cap.
® Removing the Lens
To remove the lens, press the lens
release button and turn counterclock
wise.
41
When the lens is removed from the camera, place it face down
on a stable surface to prevent damage to the electronic con
tacts.
18