Manual sensor cleaning – Canon EOS 1100 D User Manual
Page 84
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual Sensor Cleaning
If dust adhere to
the
image sensor and dust spots appear on the
images, you can clean the image sensor yourself with a camera blower.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
Select [Clean manually].
Under the [%■ ] tab, select [Clean
manually],
then press <©>.
Select [OK].
Select
[OK],
then press <©>.
In a moment, the reflex mirror will
lockup and the shutter will open.
Clean the sensor.
End the cleaning.
Set the power switch to <OFF>.
i
For the power source, using AC Adapter Kit ACK-E10 (sold separately)
is recommended.
If you use a battery, make sure it is fully recharged.
173