Removing film before the end of the roll – Canon EOS 500QD User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing Film before the End of the Roll
If you want to remove the film from the camera before the end of the roll,
rewind the film and remove it in the following way.
i '
1. Set the command dial to Qaa ,
2. Press the film rewind button (the
self-timer button) and keep it held
down for at least one second.
• The film will begin to rewind, and as
soon as winding is completed, you will
hear a sound like that of the shutter
release. The film-load mark only will
appear on the display panel.
3. Open the back cover and remove
the film.
If you remove a film before the end of the roll without using the fiim rewind function, the
next fiim ioaded wili continue to wind back into the film cartridge. To prevent this, close
the back cover once and press the shutter button down fully before loading the new film.
50