Indicators, Power saving function, Indicators power saving function – Canon IXUS 750 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Indicators

The indicators light or blink when the power button or the shutter

button is pressed.

Never do the following while an indicator is lit. These actions

may corrupt image data.

- Shake or jolt the camera

- Shut off the power, or open the memory card slot/battery

cover

MJpper Indicator

Green:

Blinking Green:

Orange:

Blinking Orange:

iLower Indicator

Yellow:

Blinking Yellow:

Ready to shoot

Image recording/reading/erasing/transferring

(when connected to a computer)

Ready to shoot (flash on)

Ready to shoot (camera shake warning)

Macro mode/infinity mode/AF lock mode

Focusing difficulty (camera beeps once)

Power Saving Function

This camera is equipped with a power saving function. The power

will shut off in the following circumstances. Press the power button

again to restore power.

Shooting Mode

Powers down approximately 3 minutes after the last

control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control is
accessed even if [Auto Power Down] is set to [Off].

Press any button other than the power button or change

the camera orientation to turn the LCD monitor back on.

Playback Mode

Connected to a Printer

Powers down approximately 5 minutes after the last

control is accessed on the camera.

This time can be changed.

1

The power saving function will not activate during a slide

show or while the camera is connected to a computer.

The power saving function settings can be changed (p. 30).

22

Advertising