Press the <zoom/"2v> button, Using the wide panel – Canon Speedlite 430EX User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ZOOM Setting the Flash Coverage and Using the Wide Panel ■

The flash coverage can be set to match the lens focal length from

24mm to 105mm. The flash coverage can be set automatically or
manually. Also, with the built-in wide panel, the flash coverage will be
compatible with ultra wide-angle lenses as short as 14mm.

Press the <ZOOM/"2V> button.

• Press the <®> button to change the

flash coverage.

• When the flash coverage is set

automatically, <C3> Is not displayed.

51 If

you set the flash coverage manually, make sure it covers the lens focal

length so that the picture will not have a dark periphery.

Using the Wide Panel

Pull out the wide panel and place it over

the flash head as shown.

• The <ZOOM/^> button will not

work.

• The flash coverage will not be compatible with the EF15mm f/2.8

Fisheye lens.

• For the effective lens focal length (or crop factor), refer to the camera's

instruction manual.

If you use bounce flash with №e wide panei In place, the entire display on

the LCD panel will blink as a warning. Since the subject will be
illuminated by both the bounce flash and direct flash, it will look

unnatural.
Pull out the wide panel gently. Using excessive force may detach the

wide panel.

18

Advertising