Fully automatic flash shooting, Ettl – Canon Speedlite 430EX User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
t SG S.S
Fully Automatic Flash Shooting
When you set the camera’s shooting mode to
<P>
(Program AE) or
<□> (Full Auto), E-TTL ll/E-TTL fully automatic flash will make it as
easy as normal AE shooting.
Set the Speedlite to
<ETTL>.
• Press the <MODE> button so that
<ETTL> is displayed.
Focus the subject
• Press the shutter button halfway to focus.
► The shutter speed and aperture will
be set as displayed in the viewfinder.
• Check that the <^> icon is lit in the
viewfinder.
Take the picture.
• Take the picture.
>■
A preflash is fired right before the shot
is taken, then the main flash is fired.
^ If a standard flash exposure was
obtained, the flash exposure confirmation
lamp will light for about 3 sec.
If the lens focal length blinks on the LCD panel, the periphery of the flash
picture may turn out dark. Use the built-in wide panel (p.lB).
0 • <ETTL> will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
• If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. Wth a digital camera, you can also
increase the camera's ISO speed.
11