Custom function settings – Canon Speedlite 430EX User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Custom Function Settings
Custom
Function
No.
Item
Setting
No.
, ..... 1 LI _ .. . -------------------' ■ “ . r- rJ ' ■ ■
Setting Description
CFn-01
Speedlite SE
(Save Energy)
0
ON
1
OFF
CFn-02
Slave unit's auto pov^er off
time
0
Auto power off after 60 min
1
Auto power oft after 10 min
CFn-03
Auto zoom for Image size
0
Enabled
1
Disabled
C Fn-04
AF-assist beam OFF
0
Disabled
1
Enabled
CFn-05
Modeling flash
0
Enabled
1
Disabled
CFn-06
LCD panel display when
shutter button pressed
halfway
0
Display maximum flash range (Displays up
to max 18m/60ft)
1
Display aperture
C.Fn-05-1 iConvenient when you want to check the depth of field, (p.28)
О • C,Fn-06 can tie set only with Type-A cameras.
• If "AF-assisl beam OFF" is set with the Speedlite or camera, the AF-
assist beam will not be emitted.
Automatic Setting of Flash Coverage for the Camera’s Image Size
EOS digital cameras have one of three image sizes. The lens’ effective
focal length will differ depending on the camera's image size. The
Speedlite automatically recognizes the EOS digital camera’s image size
and automatically sets the flash coverage for lens focal lengths from
24mm to 105mm.
When the Speedlite is attached to a compatible camera, <B> will
appear on the Speedlite’s LCD panel.
21