Setting the slave id, Modeling flash, About slave group control – Canon Speedlite 430EX User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Slave ID
Set the slave ID if you use two (A and B) or three (A, B, and C) slave
groups.
__
i
Press the <ZOOM/^> button
ETTLOZoom iWmm I .. ,
,
so that <EES13> blinks.
>
Press the <®> button to select
the slave ID (A, B, or C).
> Press the <(D> button to set the
slave ID.
Modeling Flash
If the camera has a depth-of-field preview button, press it to fire a 1 -sec,
burst of flashes. This is the modeling flash.
You can check the lighting and shadow effects. You can fire the
modeling flash for both wireless and normal flash shooting.
(I Do not fire Ihe modeling flash more than
10
consecutive Urnes. Ifypu fire the
modeling Bash 10 consecutive times, allow the %>eedlite to rest for at least
10 min. to avoid overheating and deteriorating the flash head.
0 The modeling flash cannot be fired with the EOS 300/REBEL 2000 and
Type-B cameras (p.2).
About Slave Group Control
Slave group A
For example, if you have the slave ID set
to
<A>
for three Speedlites, all three
Speedlites will be controlled as if they
were one Speedlite in slave group A.
28