Setting the aperture on the camera – Canon 577 G User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE APERTURE
ON THE CAMERA
New F-1 (Shutter-Priority Mode),
A-1, AE-1 PROGRAM, and AE-1
•FD Lens: Leave the lens on “A”.
The aperture you have set on the
flash will be set on the camera
automatically when the 577G’s
pilot lamp glows. The settings of
the A-Ts AE mode selector and
AT dial do not matter (except in
relation to shutter speed, p. 12). [If
you wish, you may remove the
aperture ring from “A” and turn it
to the auto aperture you have set
on the flash or to a different
aperture to make an exposure cor
rection. In this case, remember to
reset the aperture each time you
reset the selection switch on the
577G.]
• FL Lens: See “Other Cameras”,
next column.
New F-1 (Manual, Aperture-Priority
Modes) and Other Cameras
Turn the aperture ring to the same
aperture you have set with the selec
tion switch on the flash or to a dif
ferent aperture if you wish to correct
exposure.
15