Shooting – Canon 577 G User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SHOOTING

Once all preparations detailed on the

preceding pages have been made,
make sure the subject is in focus and

that the 577G’s pilot lamp is glowing.

Then press the shutter button to take
the picture. If the auto check lamp
glows immediately afterwards, it

means that you were close enough to

the subject for correct exposure.

* In delayed flash photography with

the camera’s self-timer, do not

press the shutter button to set the

timer until the pilot lamp glows.

* When the shooting distance is less

than one meter, the difference be­

tween the optical axes of the lens
and the flash may result in uneven

lighting.

* Since it is possible for viewfinder

information in the New F-1, AE-1,

AL-1, or AV-1 to be the same in

flash photography as in normal

AE photography, it is advisable to
check that the pilot lamp is glow­
ing before shooting.

♦ You can continue flash photo­

graphy if the pilot lamp is still
glowing after the shutter is re­
leased. If the pilot lamp does go

out after a flash shot, you can

take a shot in the normal AE

mode while waiting for it to glow

again. (This, however, does not
apply when the shutter speed is

set to “B” or when the camera is

not set for AE photography.)

Make sure that the shutter speed

or aperture which will be used for

normal AE photography will give

correct exposure, too.

When the flash is no longer

necessary, be sure to turn off

the Transistor Pack G’s power

switch to prevent battery drain.
With the power switch off, it is

possible to shoot normally without

detaching the flash or the sensor.

While performing normal AE

photography as the flash recycles,

there is a possibility that, while the

shutter curtain is open, the 577G’s

pilot lamp will glow and the flash
may fire. In this case, correct ex­
posure cannot be guaranteed.

PROBLEM BACKGROUNDS

Certain types of background may
lead to incorrect exposure. A very
small subject against a very dark or
distant background may turn out

overexposed. On the other hand, if

the surroundings are bright white
with strong reflections, the subject

may be underexposed.

J

20

Advertising