Canon T2000 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Input(9)
This is a DIN 41524 jack
for connection of the
microphone supplied with
the projector or of an
auxiliary sound source,
such as a tape recorder,
cassette recorder or record
player.
Output (22)
This is a DIN 41529 jack
as is generally used for
connecting loudspeakers
to sound equipment. Make
sure that the external spea
ker plugged into this out
put has a 4-ohm rating and
set it up near the screen
for optimum results. The
built-in speaker (23) is au
tomatically disconnected
as an external speaker is
plugged into output (22).
Alternatively, high-impe-
dance headphones (S 600
ohms) may be connected
13
Advertising