Setting the date and time – Canon IXUS 100 IS User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
I
Turn on the camera.
Press the ON/OFF button.
The Date/Time screen will appear.
Set the date and time.
Press the buttons to select an option.
Press the buttons to set a value.
Make the setting.
Press the @ button.
Once the date and time have been set,
the Date/Time screen will close.
Pressing the ON/OFF button will turn off
the camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn on the camera.
Daylight saving time settings
If you select i ® ■ in Step 2 and press the A.''
the time to daylight savings (1 hour ahead).
■ buttons and select you will set
13