CLIFFORD 420.4X - Manual (Page 14)

11 © 2011 Directed Electronics. All rights reserved.
Remote Valet
Press and release
Enters (or if On, exits) Valet Mode. The Control Center LED turns on
and off accordingly, and prevents doors from locking passively. The
The Unlock LED and Valet beeps play (1 for on, 2 for off) to confirm.
Timer Start*
Press and release
Activates (or if On, deactivates) Timer Start. The parking lights flash
quickly four times for On and slowly four times for Off. The Remote
Start LED and beeps play (1 for on, 2 for off) to confirm.
Note System needs to be locked or Timer Start will not start the
engine.
AUX 2
Press and release AUX
Activates (or if On, deactivates) the Aux 2 output. The Aux LED and
On tones or Off tones play to confirm.
Lock Status
Press and hold the button.
The remote will generate an output using the LED’s and beeps/tones
to display the systems Lock Status since its last update message or
command operation. It will report status via ghost LED’s, beeps, and
tones as described in this section for Lock, Unlock, Valet mode and
Silent lock.
*See “Advanced Start” under “Remote Start Features” for more de-
tails.