LG LMX28988 - Manual (Page 24)

HOW TO USE
ADJUSTING THE TEMPERATURES AND DISPLAY
Adjust Freezer Temperature
To adjust the temperature in the freezer
compartment, press the FREEZER button to cycle
through the the range of available settings.
Power Saving Mode
FREEZER
FREEZER
n
U ° F
ICE / ENERGY
PLUS / SAVING :
Adjust Refrigerator Temperature
To adjust the temperature in the refrigerator
compartment, press the REFRIGERATOR button to
cycle through the range of available settings.
REFRIGERATOR
-|
1 =
NOTE: The actual inner temperature varies
depending on the food status, since the indicated
temperature setting is the target temperature and
not the actual temperature within the refrigerator.
Initially set the REFRIGERATOR CONTROL at
37 degrees F and the FREEZER CONTROL at
0 degrees F. Leave them at these setting for
24 hours (one day) to stabilize. Then adjust the
compartment temperature as illustrated above.
• The display will remain off until the next time the
door is opened.
The display will also turn on when any button is
pressed, and it will remain on for 20 seconds after
the last door opening or button selection.
• To deactivate the Power-Saving Mode, press the
FREEZER and ICE PLUS/ENERGY SAVING
buttons simultaneously and hold them for 5 seconds
until the tone sounds.
NOTE: Power Saving Mode function is set on the
product.
Caution When Closing the Door
Temperature Display
To change the temperature display from Fahrenheit
to Celsius:
FREEZER
REFRIGERATOR
' Simultaneously press and hold the FREEZER
and REFRIGERATOR buttons for more than
5 seconds.
' Do the same to convert back to Fahrenheit.
ACAUTION
To reduce the risk of door scratches, please make
sure that the refrigerator door mullion is always folded
in.
If dew gathers on the refrigerator door mullion at any
point, deactivate the Energy Saving mode until the
issue resolves itself.
24