Canon EOS 600D - Manual (Page 203)

203
x Searching for Images Quickly
With the single image display, you can turn the <6> dial to jump
through the images forward or back according to the jump method that
was set.
1
Select [Image jump w/6].
Under the [4] tab, select [Image
jump w/6], then press <
0>.
2
Select the jump method.
Press the < S> key to select the
jump method, then press < 0>.
d : Display images one by one
e : Jump 10 images
f : Jump 100 images
g : Display by date
h : Display by folder
i : Display movies only
j : Display stills only
k : Display by image rating (p.206)
Turn the <6> dial to select the
rating.
3
Browse by jumping.
Press the <x> button to playback
images.
On the single-image display, turn the
<6> dial.
I
Jump through Images (Jump display)
Playback position
Jump method
To search images according to the shooting date, select [Date].
To search images according to folder, select [Folder].
If the card contains both [Movies] and [Stills], select either one to
display only movies or stills.
If no images match the selected [Rating], browsing through the images
with <6> is not possible.